| Sponsored by: | |
| |
                       |
The Build Diary - Module 4
|
|||||
|
Module 4 Build: <28th January 2006> Horn: To fit the horn i needed to first insert a rivnut into the chassis. I used an M6 rivnut as it would fit nicely through both the mounting bracket and the wiring loop connection. So once the rivnut was in i used a wire brush to take some of the powder coating off the chassis rail for the earth connection. Then i bent the bracket 90 degrees so it would fit aroud the chassis rail. 
Then it was just a case of bolting it in place and connecting the wiring loom connection to the +ive connector on the horn. 
|